Configure LDAP authentication
The LDAP integration in Grafana allows your Grafana users to login with their LDAP credentials. You can also specify mappings between LDAP group memberships and Grafana Organization user roles.
NOTE: Enhanced LDAP authentication is available in Grafana Cloud and in Grafana Enterprise.
Refer to Role-based access control to understand how you can control access with role-based permissions.
Supported LDAP Servers
Grafana uses a third-party LDAP library under the hood that supports basic LDAP v3 functionality. This means that you should be able to configure LDAP integration using any compliant LDAPv3 server, for example OpenLDAP or Active Directory among others.
Enable LDAP
In order to use LDAP integration you’ll first need to enable LDAP in the main config file as well as specify the path to the LDAP specific configuration file (default: /etc/grafana/ldap.toml
).
After enabling LDAP, the default behavior is for Grafana users to be created automatically upon successful LDAP authentication. If you prefer for only existing Grafana users to be able to sign in, you can change allow_sign_up
to false
in the [auth.ldap]
section.
[auth.ldap]
# Set to `true` to enable LDAP integration (default: `false`)
enabled = true
# Path to the LDAP specific configuration file (default: `/etc/grafana/ldap.toml`)
config_file = /etc/grafana/ldap.toml
# Allow sign-up should be `true` (default) to allow Grafana to create users on successful LDAP authentication.
# If set to `false` only already existing Grafana users will be able to login.
allow_sign_up = true
Disable org role synchronization
If you use LDAP to authenticate users but don’t use role mapping, and prefer to manually assign organizations and roles, you can use the skip_org_role_sync
configuration option.
[auth.ldap]
# Set to `true` to enable LDAP integration (default: `false`)
enabled = true
# Path to the LDAP specific configuration file (default: `/etc/grafana/ldap.toml`)
config_file = /etc/grafana/ldap.toml
# Allow sign-up should be `true` (default) to allow Grafana to create users on successful LDAP authentication.
# If set to `false` only already existing Grafana users will be able to login.
allow_sign_up = true
# Prevent synchronizing ldap users organization roles
skip_org_role_sync = true
Grafana LDAP Configuration
Depending on which LDAP server you’re using and how that’s configured your Grafana LDAP configuration may vary. See configuration examples for more information.
LDAP specific configuration file (ldap.toml) example:
[[servers]]
# Ldap server host (specify multiple hosts space separated)
host = "ldap.my_secure_remote_server.org"
# Default port is 389 or 636 if use_ssl = true
port = 636
# Set to true if LDAP server should use an encrypted TLS connection (either with STARTTLS or LDAPS)
use_ssl = true
# If set to true, use LDAP with STARTTLS instead of LDAPS
start_tls = false
# The value of an accepted TLS cipher. By default, this value is empty. Example value: ["TLS_AES_256_GCM_SHA384"])
# For a complete list of supported ciphers and TLS versions, refer to: https://go.dev/src/crypto/tls/cipher_suites.go
tls_ciphers = []
# This is the minimum TLS version allowed. By default, this value is empty. Accepted values are: TLS1.1, TLS1.2, TLS1.3.
min_tls_version = ""
# set to true if you want to skip SSL cert validation
ssl_skip_verify = false
# set to the path to your root CA certificate or leave unset to use system defaults
# root_ca_cert = "/path/to/certificate.crt"
# Authentication against LDAP servers requiring client certificates
# client_cert = "/path/to/client.crt"
# client_key = "/path/to/client.key"
# Search user bind dn
bind_dn = "cn=admin,dc=grafana,dc=org"
# Search user bind password
# If the password contains # or ; you have to wrap it with triple quotes. Ex """#password;"""
bind_password = "grafana"
# We recommend using variable expansion for the bind_password, for more info https://grafana.com/docs/grafana/latest/setup-grafana/configure-grafana/#variable-expansion
# bind_password = '$__env{LDAP_BIND_PASSWORD}'
# Timeout in seconds. Applies to each host specified in the 'host' entry (space separated).
timeout = 10
# User search filter, for example "(cn=%s)" or "(sAMAccountName=%s)" or "(uid=%s)"
# Allow login from email or username, example "(|(sAMAccountName=%s)(userPrincipalName=%s))"
search_filter = "(cn=%s)"
# An array of base dns to search through
search_base_dns = ["dc=grafana,dc=org"]
# group_search_filter = "(&(objectClass=posixGroup)(memberUid=%s))"
# group_search_filter_user_attribute = "distinguishedName"
# group_search_base_dns = ["ou=groups,dc=grafana,dc=org"]
# Specify names of the LDAP attributes your LDAP uses
[servers.attributes]
member_of = "memberOf"
email = "email"
NOTE: Whenever you modify the ldap.toml file, you must restart Grafana in order for the change(s) to take effect.
LDAP debug view
NOTE: Available in Grafana v6.4+
Grafana has an LDAP debug view built-in which allows you to test your LDAP configuration directly within Grafana. Only Grafana admins can use the LDAP debug view.
Within this view, you’ll be able to see which LDAP servers are currently reachable and test your current configuration.
To use the debug view, complete the following steps:
-
Type the username of a user that exists within any of your LDAP server(s)
-
Then, press “Run”
-
If the user is found within any of your LDAP instances, the mapping information is displayed.
Grafana Enterprise users with enhanced LDAP integration enabled can also see sync status in the debug view. This requires the ldap.status:read
permission.
Bind and bind password
By default the configuration expects you to specify a bind DN and bind password. This should be a read only user that can perform LDAP searches. When the user DN is found a second bind is performed with the user provided username and password (in the normal Grafana login form).
bind_dn = "cn=admin,dc=grafana,dc=org"
bind_password = "grafana"
Single bind example
If you can provide a single bind expression that matches all possible users, you can skip the second bind and bind against the user DN directly. This allows you to not specify a bind_password in the configuration file.
bind_dn = "cn=%s,o=users,dc=grafana,dc=org"
In this case you skip providing a bind_password
and instead provide a bind_dn
value with a %s
somewhere. This will be replaced with the username entered in on the Grafana login page. The search filter and search bases settings are still needed to perform the LDAP search to retrieve the other LDAP information (like LDAP groups and email).
POSIX schema
If your LDAP server does not support the memberOf
attribute, add the following options:
## Group search filter, to retrieve the groups of which the user is a member (only set if memberOf attribute is not available)
group_search_filter = "(&(objectClass=posixGroup)(memberUid=%s))"
## An array of the base DNs to search through for groups. Typically uses ou=groups
group_search_base_dns = ["ou=groups,dc=grafana,dc=org"]
## the %s in the search filter will be replaced with the attribute defined below
group_search_filter_user_attribute = "uid"
Group mappings
In [[servers.group_mappings]]
you can map an LDAP group to a Grafana organization and role. These will be synced every time the user logs in, with LDAP being the authoritative source.
The first group mapping that an LDAP user is matched to will be used for the sync. If you have LDAP users that fit multiple mappings, the topmost mapping in the TOML configuration will be used.
LDAP specific configuration file (ldap.toml) example:
[[servers]]
# other settings omitted for clarity
[[servers.group_mappings]]
group_dn = "cn=superadmins,dc=grafana,dc=org"
org_role = "Admin"
grafana_admin = true # Available in Grafana v5.3 and above
[[servers.group_mappings]]
group_dn = "cn=admins,dc=grafana,dc=org"
org_role = "Admin"
[[servers.group_mappings]]
group_dn = "cn=users,dc=grafana,dc=org"
org_role = "Editor"
[[servers.group_mappings]]
group_dn = "*"
org_role = "Viewer"
Setting | Required | Description | Default |
---|---|---|---|
|
Yes |
LDAP distinguished name (DN) of LDAP group. If you want to match all (or no LDAP groups) then you can use wildcard ( |
|
|
Yes |
Assign users of |
|
|
No |
The Grafana organization database id. Setting this allows for multiple group_dn’s to be assigned to the same |
|
|
No |
When |
|
NOTE: Commenting out a group mapping requires also commenting out the header of said group or it will fail validation as an empty mapping.
Example:
[[servers]]
# other settings omitted for clarity
[[servers.group_mappings]]
group_dn = "cn=superadmins,dc=grafana,dc=org"
org_role = "Admin"
grafana_admin = true # Available in Grafana v5.3 and above
# [[servers.group_mappings]]
# group_dn = "cn=admins,dc=grafana,dc=org"
# org_role = "Admin"
[[servers.group_mappings]]
group_dn = "cn=users,dc=grafana,dc=org"
org_role = "Editor"
Nested/recursive group membership
Users with nested/recursive group membership must have an LDAP server that supports LDAP_MATCHING_RULE_IN_CHAIN
and configure group_search_filter
in a way that it returns the groups the submitted username is a member of.
To configure group_search_filter
:
-
You can set
group_search_base_dns
to specify where the matching groups are defined. -
If you do not use
group_search_base_dns
, then the previously definedsearch_base_dns
is used.
Active Directory example:
Active Directory groups store the Distinguished Names (DNs) of members, so your filter will need to know the DN for the user based only on the submitted username. Multiple DN templates are searched by combining filters with the LDAP OR-operator. Two examples:
group_search_filter = "(member:1.2.840.113556.1.4.1941:=%s)"
group_search_base_dns = ["DC=mycorp,DC=mytld"]
group_search_filter_user_attribute = "dn"
group_search_filter = "(member:1.2.840.113556.1.4.1941:=CN=%s,[user container/OU])"
group_search_filter = "(|(member:1.2.840.113556.1.4.1941:=CN=%s,[user container/OU])(member:1.2.840.113556.1.4.1941:=CN=%s,[another user container/OU]))"
group_search_filter_user_attribute = "cn"
For more information on AD searches see Microsoft’s Search Filter Syntax documentation.
For troubleshooting, changing member_of
in [servers.attributes]
to “dn” will show you more accurate group memberships when debug is enabled.
Configuration examples
The following examples describe different LDAP configuration options.
OpenLDAP
OpenLDAP is an open source directory service.
LDAP specific configuration file (ldap.toml):
[[servers]]
host = "127.0.0.1"
port = 389
use_ssl = false
start_tls = false
ssl_skip_verify = false
bind_dn = "cn=admin,dc=grafana,dc=org"
bind_password = "grafana"
search_filter = "(cn=%s)"
search_base_dns = ["dc=grafana,dc=org"]
[servers.attributes]
member_of = "memberOf"
email = "email"
# [[servers.group_mappings]] omitted for clarity
Multiple LDAP servers
Grafana does support receiving information from multiple LDAP servers.
LDAP specific configuration file (ldap.toml):
# --- First LDAP Server ---
[[servers]]
host = "10.0.0.1"
port = 389
use_ssl = false
start_tls = false
ssl_skip_verify = false
bind_dn = "cn=admin,dc=grafana,dc=org"
bind_password = "grafana"
search_filter = "(cn=%s)"
search_base_dns = ["ou=users,dc=grafana,dc=org"]
[servers.attributes]
member_of = "memberOf"
email = "email"
[[servers.group_mappings]]
group_dn = "cn=admins,ou=groups,dc=grafana,dc=org"
org_role = "Admin"
grafana_admin = true
# --- Second LDAP Server ---
[[servers]]
host = "10.0.0.2"
port = 389
use_ssl = false
start_tls = false
ssl_skip_verify = false
bind_dn = "cn=admin,dc=grafana,dc=org"
bind_password = "grafana"
search_filter = "(cn=%s)"
search_base_dns = ["ou=users,dc=grafana,dc=org"]
[servers.attributes]
member_of = "memberOf"
email = "email"
[[servers.group_mappings]]
group_dn = "cn=editors,ou=groups,dc=grafana,dc=org"
org_role = "Editor"
[[servers.group_mappings]]
group_dn = "*"
org_role = "Viewer"
Active Directory
Active Directory is a directory service which is commonly used in Windows environments.
Assuming the following Active Directory server setup:
-
IP address:
10.0.0.1
-
Domain:
CORP
-
DNS name:
corp.local
LDAP specific configuration file (ldap.toml):
[[servers]]
host = "10.0.0.1"
port = 3269
use_ssl = true
start_tls = false
ssl_skip_verify = true
bind_dn = "CORP\\%s"
search_filter = "(sAMAccountName=%s)"
search_base_dns = ["dc=corp,dc=local"]
[servers.attributes]
member_of = "memberOf"
email = "mail"
# [[servers.group_mappings]] omitted for clarity
Port requirements
In above example SSL is enabled and an encrypted port have been configured. If your Active Directory don’t support SSL please change enable_ssl = false
and port = 389
. Please inspect your Active Directory configuration and documentation to find the correct settings. For more information about Active Directory and port requirements see link.
Troubleshooting
To troubleshoot and get more log info enable LDAP debug logging in the main config file.
[log]
filters = ldap:debug