PostgreSQL

Specifies the name of the database to be dumped. If this is not specified, the environment variable PGDATABASE is used. If that is not set, the user name specified for the connection is used. [.term]#-a

Dump only the data, not the schema (data definitions). Table data, large objects, and sequence values are dumped.
This option is similar to, but for historical reasons not identical to, specifying --section=data. -b
#[.term]--large-objects

Include large objects in the dump. This is the default behavior except when --schema, --table, or --schema-only is specified. The -b switch is therefore only useful to add large objects to dumps where a specific schema or table has been requested. Note that large objects are considered data and therefore will be included when --data-only is used, but not when --schema-only is. -B
#[.term]--no-large-objects

Exclude large objects in the dump.
When both -b and -B are given, the behavior is to output large objects, when data is being dumped, see the -b documentation. [.term]#-c

Output commands to DROP all the dumped database objects prior to outputting the commands for creating them. This option is useful when the restore is to overwrite an existing database. If any of the objects do not exist in the destination database, ignorable error messages will be reported during restore, unless --if-exists is also specified.
This option is ignored when emitting an archive (non-text) output file. For the archive formats, you can specify the option when you call pg_restore. [.term]#-C

Begin the output with a command to create the database itself and reconnect to the created database. (With a script of this form, it doesn’t matter which database in the destination installation you connect to before running the script.) If --clean is also specified, the script drops and recreates the target database before reconnecting to it.
With --create, the output also includes the database’s comment if any, and any configuration variable settings that are specific to this database, that is, any ALTER DATABASE ... SET ... and ALTER ROLE ... IN DATABASE ... SET ... commands that mention this database. Access privileges for the database itself are also dumped, unless --no-acl is specified.
This option is ignored when emitting an archive (non-text) output file. For the archive formats, you can specify the option when you call pg_restore. [.term]#`-e +`_`+pattern`_

Dump only extensions matching `pattern. When this option is not specified, all non-system extensions in the target database will be dumped. Multiple extensions can be selected by writing multiple `-e switches. The `pattern parameter is interpreted as a pattern according to the same rules used by psql’s `\d commands (see Patterns), so multiple extensions can also be selected by writing wildcard characters in the pattern. When using wildcards, be careful to quote the pattern if needed to prevent the shell from expanding the wildcards. + Any configuration relation registered by pg_extension_config_dump is included in the dump if its extension is specified by --extension. + [NOTE] ==== ==== Note

  When `+-e+` is specified, pg_dump makes no attempt to dump any other database objects that the selected extension(s) might depend upon. Therefore, there is no guarantee that the results of a specific-extension dump can be successfully restored by themselves into a clean database.
  ====
[.term]#`+-E +`_`+encoding+`_ +

Create the dump in the specified character set encoding. By default, the dump is created in the database encoding. (Another way to get the same result is to set the PGCLIENTENCODING environment variable to the desired dump encoding.) The supported encodings are described in Section 24.3.1. [.term]#`-f +`_`+file`_

Send output to the specified file. This parameter can be omitted for file based output formats, in which case the standard output is used. It must be given for the directory output format however, where it specifies the target directory instead of a file. In this case the directory is created by pg_dump and must not exist before. [.term]#`-F +`_`+format`_

Selects the format of the output. `format can be one of the following: + [.term]#p`

Run the dump in parallel by dumping `njobs tables simultaneously. This option may reduce the time needed to perform the dump but it also increases the load on the database server. You can only use this option with the directory output format because this is the only output format where multiple processes can write their data at the same time.
pg_dump will open njobs + 1 connections to the database, so make sure your max_connections setting is high enough to accommodate all connections.
Requesting exclusive locks on database objects while running a parallel dump could cause the dump to fail. The reason is that the pg_dump leader process requests shared locks (ACCESS SHARE) on the objects that the worker processes are going to dump later in order to make sure that nobody deletes them and makes them go away while the dump is running. If another client then requests an exclusive lock on a table, that lock will not be granted but will be queued waiting for the shared lock of the leader process to be released. Consequently any other access to the table will not be granted either and will queue after the exclusive lock request. This includes the worker process trying to dump the table. Without any precautions this would be a classic deadlock situation. To detect this conflict, the pg_dump worker process requests another shared lock using the `NOWAIT option. If the worker process is not granted this shared lock, somebody else must have requested an exclusive lock in the meantime and there is no way to continue with the dump, so pg_dump has no choice but to abort the dump.
To perform a parallel dump, the database server needs to support synchronized snapshots, a feature that was introduced in PostgreSQL 9.2 for primary servers and 10 for standbys. With this feature, database clients can ensure they see the same data set even though they use different connections. pg_dump -j uses multiple database connections; it connects to the database once with the leader process and once again for each worker job. Without the synchronized snapshot feature, the different worker jobs wouldn’t be guaranteed to see the same data in each connection, which could lead to an inconsistent backup. [.term]#`-n +`_`+pattern`_

Dump only schemas matching `pattern; this selects both the schema itself, and all its contained objects. When this option is not specified, all non-system schemas in the target database will be dumped. Multiple schemas can be selected by writing multiple `-n switches. The `pattern parameter is interpreted as a pattern according to the same rules used by psql’s `\d commands (see Patterns), so multiple schemas can also be selected by writing wildcard characters in the pattern. When using wildcards, be careful to quote the pattern if needed to prevent the shell from expanding the wildcards; see Examples below. + [NOTE] ==== ==== Note

When `+-n+` is specified, pg_dump makes no attempt to dump any other database objects that the selected schema(s) might depend upon. Therefore, there is no guarantee that the results of a specific-schema dump can be successfully restored by themselves into a clean database.
====
+
[NOTE]
====
==== Note

  Non-schema objects such as large objects are not dumped when `+-n+` is specified. You can add large objects back to the dump with the `+--large-objects+` switch.
  ====
[.term]#`+-N +`_`+pattern+`_ +

Do not dump any schemas matching `pattern. The pattern is interpreted according to the same rules as for `-n. -N can be given more than once to exclude schemas matching any of several patterns.
When both -n and -N are given, the behavior is to dump just the schemas that match at least one -n switch but no -N switches. If -N appears without -n, then schemas matching -N are excluded from what is otherwise a normal dump. [.term]#-O

Do not output commands to set ownership of objects to match the original database. By default, pg_dump issues ALTER OWNER or SET SESSION AUTHORIZATION statements to set ownership of created database objects. These statements will fail when the script is run unless it is started by a superuser (or the same user that owns all of the objects in the script). To make a script that can be restored by any user, but will give that user ownership of all the objects, specify -O.
This option is ignored when emitting an archive (non-text) output file. For the archive formats, you can specify the option when you call pg_restore. [.term]#-R

This option is obsolete but still accepted for backwards compatibility. [.term]#-s

Dump only the object definitions (schema), not data.
This option is the inverse of --data-only. It is similar to, but for historical reasons not identical to, specifying --section=pre-data --section=post-data.
(Do not confuse this with the --schema option, which uses the word “[.quote]#schema”# in a different meaning.)
To exclude table data for only a subset of tables in the database, see --exclude-table-data. [.term]#`-S +`_`+username`_

Specify the superuser user name to use when disabling triggers. This is relevant only if --disable-triggers is used. (Usually, it’s better to leave this out, and instead start the resulting script as superuser.) [.term]#`-t +`_`+pattern`_

Dump only tables with names matching `pattern. Multiple tables can be selected by writing multiple `-t switches. The `pattern parameter is interpreted as a pattern according to the same rules used by psql’s `\d commands (see Patterns), so multiple tables can also be selected by writing wildcard characters in the pattern. When using wildcards, be careful to quote the pattern if needed to prevent the shell from expanding the wildcards; see Examples below. + As well as tables, this option can be used to dump the definition of matching views, materialized views, foreign tables, and sequences. It will not dump the contents of views or materialized views, and the contents of foreign tables will only be dumped if the corresponding foreign server is specified with --include-foreign-data. + The -n and -N switches have no effect when -t is used, because tables selected by -t will be dumped regardless of those switches, and non-table objects will not be dumped. + [NOTE] ==== ==== Note

  When `+-t+` is specified, pg_dump makes no attempt to dump any other database objects that the selected table(s) might depend upon. Therefore, there is no guarantee that the results of a specific-table dump can be successfully restored by themselves into a clean database.
  ====
[.term]#`+-T +`_`+pattern+`_ +

Do not dump any tables matching `pattern. The pattern is interpreted according to the same rules as for `-t. -T can be given more than once to exclude tables matching any of several patterns.
When both -t and -T are given, the behavior is to dump just the tables that match at least one -t switch but no -T switches. If -T appears without -t, then tables matching -T are excluded from what is otherwise a normal dump. [.term]#-v

Specifies verbose mode. This will cause pg_dump to output detailed object comments and start/stop times to the dump file, and progress messages to standard error. Repeating the option causes additional debug-level messages to appear on standard error. [.term]#-V

Print the pg_dump version and exit. -x
#[.term]--no-privileges

Prevent dumping of access privileges (grant/revoke commands). -Z +`_`+level`_
#[.term]-Z +`_`+method[:detail]
[.term]--compress=level`_

Specify the compression method and/or the compression level to use. The compression method can be set to gzip, lz4, zstd, or none for no compression. A compression detail string can optionally be specified. If the detail string is an integer, it specifies the compression level. Otherwise, it should be a comma-separated list of items, each of the form keyword or keyword=value. Currently, the supported keywords are level and long. + If no compression level is specified, the default compression level will be used. If only a level is specified without mentioning an algorithm, gzip compression will be used if the level is greater than 0, and no compression will be used if the level is 0. + For the custom and directory archive formats, this specifies compression of individual table-data segments, and the default is to compress using gzip at a moderate level. For plain text output, setting a nonzero compression level causes the entire output file to be compressed, as though it had been fed through gzip, lz4, or zstd; but the default is not to compress. With zstd compression, long mode may improve the compression ratio, at the cost of increased memory use. + The tar archive format currently does not support compression at all.

This option is for use by in-place upgrade utilities. Its use for other purposes is not recommended or supported. The behavior of the option may change in future releases without notice. [.term]#--column-inserts

Dump data as INSERT commands with explicit column names (INSERT INTO +`_`+table`+ (`_`+column, ...) VALUES ...). This will make restoration very slow; it is mainly useful for making dumps that can be loaded into non-PostgreSQL databases. Any error during restoring will cause only rows that are part of the problematic `INSERT to be lost, rather than the entire table contents.

This option disables the use of dollar quoting for function bodies, and forces them to be quoted using SQL standard string syntax.

This option is relevant only when creating a data-only dump. It instructs pg_dump to include commands to temporarily disable triggers on the target tables while the data is restored. Use this if you have referential integrity checks or other triggers on the tables that you do not want to invoke during data restore. + Presently, the commands emitted for --disable-triggers must be done as superuser. So, you should also specify a superuser name with -S, or preferably be careful to start the resulting script as a superuser. + This option is ignored when emitting an archive (non-text) output file. For the archive formats, you can specify the option when you call pg_restore.

This option is relevant only when dumping the contents of a table which has row security. By default, pg_dump will set row_security to off, to ensure that all data is dumped from the table. If the user does not have sufficient privileges to bypass row security, then an error is thrown. This parameter instructs pg_dump to set row_security to on instead, allowing the user to dump the parts of the contents of the table that they have access to. + Note that if you use this option currently, you probably also want the dump be in INSERT format, as the COPY FROM during restore does not support row security.

This is the same as the -T/--exclude-table option, except that it also excludes any partitions or inheritance child tables of the table(s) matching the `pattern`.

Do not dump data for any tables matching `pattern. The pattern is interpreted according to the same rules as for `-t. --exclude-table-data can be given more than once to exclude tables matching any of several patterns. This option is useful when you need the definition of a particular table even though you do not need the data in it. + To exclude data for all tables in the database, see --schema-only.

This is the same as the --exclude-table-data option, except that it also excludes data of any partitions or inheritance child tables of the table(s) matching the `pattern`.

Use the specified value of extra_float_digits when dumping floating-point data, instead of the maximum available precision. Routine dumps made for backup purposes should not use this option.

Use DROP ... IF EXISTS commands to drop objects in --clean mode. This suppresses “[.quote]#does not exist”# errors that might otherwise be reported. This option is not valid unless --clean is also specified.

Dump the data for any foreign table with a foreign server matching `foreignserver pattern. Multiple foreign servers can be selected by writing multiple `--include-foreign-data switches. Also, the `foreignserver parameter is interpreted as a pattern according to the same rules used by psql’s `\d commands (see Patterns), so multiple foreign servers can also be selected by writing wildcard characters in the pattern. When using wildcards, be careful to quote the pattern if needed to prevent the shell from expanding the wildcards; see Examples below. The only exception is that an empty pattern is disallowed. + [NOTE] ==== ==== Note

When `+--include-foreign-data+` is specified, pg_dump does not check that the foreign table is writable. Therefore, there is no guarantee that the results of a foreign table dump can be successfully restored.
====

Dump data as INSERT commands (rather than COPY). This will make restoration very slow; it is mainly useful for making dumps that can be loaded into non-PostgreSQL databases. Any error during restoring will cause only rows that are part of the problematic INSERT to be lost, rather than the entire table contents. Note that the restore might fail altogether if you have rearranged column order. The --column-inserts option is safe against column order changes, though even slower.

When dumping data for a table partition, make the COPY or INSERT statements target the root of the partitioning hierarchy that contains it, rather than the partition itself. This causes the appropriate partition to be re-determined for each row when the data is loaded. This may be useful when restoring data on a server where rows do not always fall into the same partitions as they did on the original server. That could happen, for example, if the partitioning column is of type text and the two systems have different definitions of the collation used to sort the partitioning column.

Do not wait forever to acquire shared table locks at the beginning of the dump. Instead fail if unable to lock a table within the specified `timeout. The timeout may be specified in any of the formats accepted by `SET statement_timeout. (Allowed formats vary depending on the server version you are dumping from, but an integer number of milliseconds is accepted by all versions.)

Do not dump comments.

Do not dump publications.

Do not dump security labels.

Do not dump subscriptions.

By default, pg_dump will wait for all files to be written safely to disk. This option causes pg_dump to return without waiting, which is faster, but means that a subsequent operating system crash can leave the dump corrupt. Generally, this option is useful for testing but should not be used when dumping data from production installation.

Do not output commands to select table access methods. With this option, all objects will be created with whichever table access method is the default during restore. + This option is ignored when emitting an archive (non-text) output file. For the archive formats, you can specify the option when you call pg_restore.

Do not output commands to select tablespaces. With this option, all objects will be created in whichever tablespace is the default during restore. + This option is ignored when emitting an archive (non-text) output file. For the archive formats, you can specify the option when you call pg_restore.

Do not output commands to set TOAST compression methods. With this option, all columns will be restored with the default compression setting.

Do not dump the contents of unlogged tables and sequences. This option has no effect on whether or not the table and sequence definitions (schema) are dumped; it only suppresses dumping the table and sequence data. Data in unlogged tables and sequences is always excluded when dumping from a standby server.

Add ON CONFLICT DO NOTHING to INSERT commands. This option is not valid unless --inserts, --column-inserts or --rows-per-insert is also specified.

Force quoting of all identifiers. This option is recommended when dumping a database from a server whose PostgreSQL major version is different from pg_dump’s, or when the output is intended to be loaded into a server of a different major version. By default, pg_dump quotes only identifiers that are reserved words in its own major version. This sometimes results in compatibility issues when dealing with servers of other versions that may have slightly different sets of reserved words. Using --quote-all-identifiers prevents such issues, at the price of a harder-to-read dump script.

Dump data as INSERT commands (rather than COPY). Controls the maximum number of rows per INSERT command. The value specified must be a number greater than zero. Any error during restoring will cause only rows that are part of the problematic INSERT to be lost, rather than the entire table contents.

Only dump the named section. The section name can be pre-data, data, or post-data. This option can be specified more than once to select multiple sections. The default is to dump all sections. + The data section contains actual table data, large-object contents, and sequence values. Post-data items include definitions of indexes, triggers, rules, and constraints other than validated check constraints. Pre-data items include all other data definition items.

Use a serializable transaction for the dump, to ensure that the snapshot used is consistent with later database states; but do this by waiting for a point in the transaction stream at which no anomalies can be present, so that there isn’t a risk of the dump failing or causing other transactions to roll back with a serialization_failure. See Chapter 13 for more information about transaction isolation and concurrency control. + This option is not beneficial for a dump which is intended only for disaster recovery. It could be useful for a dump used to load a copy of the database for reporting or other read-only load sharing while the original database continues to be updated. Without it the dump may reflect a state which is not consistent with any serial execution of the transactions eventually committed. For example, if batch processing techniques are used, a batch may show as closed in the dump without all of the items which are in the batch appearing. + This option will make no difference if there are no read-write transactions active when pg_dump is started. If read-write transactions are active, the start of the dump may be delayed for an indeterminate length of time. Once running, performance with or without the switch is the same.

Use the specified synchronized snapshot when making a dump of the database (see Table 9.94 for more details). + This option is useful when needing to synchronize the dump with a logical replication slot (see Chapter 49) or with a concurrent session. + In the case of a parallel dump, the snapshot name defined by this option is used rather than taking a new snapshot.

Require that each extension (-e/--extension), schema (-n/--schema) and table (-t/--table) pattern match at least one extension/schema/table in the database to be dumped. Note that if none of the extension/schema/table patterns find matches, pg_dump will generate an error even without --strict-names. + This option has no effect on -N/--exclude-schema, -T/--exclude-table, or --exclude-table-data. An exclude pattern failing to match any objects is not considered an error.

This is the same as the -t/--table option, except that it also includes any partitions or inheritance child tables of the table(s) matching the `pattern`.

Output SQL-standard SET SESSION AUTHORIZATION commands instead of ALTER OWNER commands to determine object ownership. This makes the dump more standards-compatible, but depending on the history of the objects in the dump, might not restore properly. Also, a dump using SET SESSION AUTHORIZATION will certainly require superuser privileges to restore correctly, whereas ALTER OWNER requires lesser privileges. [.term]#-?

Show help about pg_dump command line arguments, and exit.